10" MagForce High Efficiency Motor

10" MagForce High Efficiency Motor

Rewindable Three-Phase 250-300 HP, 460/575 V, 120 HZ

Get the streamlined solution needed for pumping power at maximum efficiency: MagForce High Efficiency Motors are engineered for high performance, simple startup and incredible long-term cost savings. Owners and operators benefit from electrical cost savings as a result of 94% efficiency rating in the motor for an investment payback of less than two years in typical duty rate systems*. *Results based on field trial data

Each MagForce High Efficiency Motor is powered by permanent magnet technology that enables operation at a fraction of the energy consumption when compared to traditional induction designs. When optimized and paired with an innovative Franklin Electric engineered drive, users benefit from intuitive startup and reliable protection for submersible pumping applications.

FE Select Black Logo

FE Select - Configure & Quote

USA Canada
Features
Order Info
Specifications
Resources

  • Features and Benefits

    • GROUNDBREAKING EFFICIENCY: Powered by MagForce High Efficiency Motor with up to 94% efficiency rating that is 6 points (8%) greater than standard induction motor construction. Typical duty rate systems can have a payback* of 1 to 2 years.
    • SLASH ELECTRICITY CONSUMPTION: Up to 14% energy savings* compared to traditional induction motors.
    • SIMPLIFIED INVENTORY MANAGEMENT: Available motor options cover a wide range of pump horsepower needs (up to 300 hp) with fewer SKUs to manage.
    • SMALLER FOOTPRINT: Lighter and easier to handle than standard induction motors.
    • INTUITIVE STARTUP: When optimized and paired with a Franklin Electric variable frequency drive, expect easy startups and reliable protection for any project.
    • BUILT TOGETHER TO WORK TOGETHER: Rely on components from a single trusted source for the ultimate in operational compatibility and optimized operation.
    • FULLY SUPPORTED: Comes fully supported by the industry’s leading Technical Support professionals and Field Service Engineers.
    • *Field trial data.

    Ideal for Long-run Applications

    • Groundwater remediation
    • Drainage water level control
    • Municipal/Utility water supply
    • Construction site dewatering
    • High volume and industrial livestock operations
    • Mine site dewatering and tank level control
    • Well supply geothermal HVAC systems

    Motor Specifications

    • Sand Fighter® models are equipped with Franklin’s robust Sand
    • Fighter sealing system for durability against sand or other
    • abrasives.
    • Max 3600 rpm (4 pole, 120 Hz); Nominal 3450 rpm (4 pole, 115 Hz)
    • Maximum temperature winding wire NEMA class 200
    • Standard rewindable motor with PE2/PA winding insulation
    • 10" double flange mounting design
    • All motors with factory installed leads, motor lead length: 19 ft
    • Stainless steel shell
    • Liquid lubricated radial bearings and high capacity Kingsbury type 13500 lb thrust bearing for 100% maintenance-free operation
    • Pressure-equalizing diaphragm, spring pre-loaded
    • Sand slinger
    • Nominal ambient temperature: 86°F with 1.5 ft/s cooling flow
    • Stainless steel splined shaft
    • Max. storage temperature: 5°F to 140°F
    • System Supply Voltage: 460/575 V (120 Hz)
    • Voltage Tolerance: ± 10 % UN
    • DOL-start
    • Frequency of starts: 10 starts/hour (with min. 3 minutes resting time), equally distributed
    • Motor ingress protection IP68
    • NSF/ANSI 61 Certified
    • Motor installation orientation: Vertical / horizontal (shaft end heightened)
    • Rotation counterclockwise facing shaft end (rotation reversible)
  • HPDrive
    Input
    Voltage    		MagForce High Efficiency MotorCerus X-Drive*Output Filter Options**
    Motor OnlyMax
    Amps
    at HP
    Load    		Volts
    /Hz    		S.F.Motor
    Lead    		NEMA 3R Panel***NEMA 1 Drive OnlydV/dt FilterSine Wave
    Filter
    Model No.H x W x DModel No.H x W x DNEMA 1NEMA 3RNEMA 1/3R
    2504602640285331354460
    /120    		1.15DOL
    (3)    		XS4BH250-3A75" x 68" x 29"CXD-370A-4V31.5 x 16.5 x 11.8V1K480A01V1K480A03MSD0362A300
    3002640295331423XS4BH300-3ACXD-460A-4V39.4 x 19.7 x 15.6V1K600A01V1K600A03MSD0480A300
    2505752640285331354575
    /120    		XP6BH250-3ACXD-350A-6V39.4 x 19.7 x 15.6V1K480A01V1K480A03MSD0362A300
    3002640295331423XP6BH300-3ACXD-430A-6V56.5 x 27.6 x 15.9V1K600A01V1K600A03MSD0480A300
    • The system includes: MagForce High Efficiency Motor with lead and Cerus X-Drive in NEMA 3R panel configurations or as a standalone NEMA drive.
    • The Cerus® X-Drive Variable Frequency Drive (VFD) is Franklin Electric’s all-inclusive drive solution for a variety of markets.
    • *NOTE: Firmware version 1.1 or newer is required for permanent magnet motor (or MagForce) functionality.
    • **Output filters are required when using an X-Drive with a permanent magnet motor. dV/dt filters cover motor lead lengths up to 800’. A sine wave filter is required for lead lengths greater than 800’
    • ***NEMA 3R panels include door-mounted keypad with HOA functionality, a circuit breaker, dV/dt filter, and line reactor or integrated DC Choke

  • Accessories

    AccessoriesDetailUsed WithPart Number
    Fill SolutionFES92 concentrated solutionn/a151300907*
    Fill Solution Tool KitSyringe & Test Pin308018263
    PT-100 Sensor6-12" Rewindable & PM Motors - 32ft lead lengthCerus X-Drive models308016501**
    Pressure TransducerPressure Transducer, 100PSIG, 4-20mAPSIG-100-20FT
    Pressure Transducer, 200PSIG, 4-20mAPSIG-200-20FT
    Pressure Transducer, 300PSIG, 4-20mAPSIG-300-20FT
    Optional Cards & OtherModbus TCP/IP Communication CardCMC-EIP01
    I/O Card - Additional 4 digital inputs and 2 transistor outputsEMC-D42A
    I/O Card - Additional 6 digital inputsEMC-D611A
    I/O Card - Additional 6 relay outputsEMC-R6AA
    • *Mix 1 part FES92 with 2 parts deionized water, shake concentrate prior to using
    • **Reference installation guide for appropriate sensor depth

  • Catalogs

    Brochures

    Manuals

    Videos