10" Rewindable Submersible Motors
10" Rewindable Submersible Motors
These 10" rewindable motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 10" diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The Sand fighter® SiC seal system is standard. For applications in aggressive media, motors made of 316 SS and 904 L are available.

-
Features & Benefits
- Easy to assemble with double flange
- Cable material according to drinking water regulations (VDE/ACS/KTW approved)
- Sand fighter® SiC seal system for high performance in sand
- High efficiency electrical design for low operation cost
- All motors prefilled and 100% tested
- Max. storage temperature 5 °F (-15 °C) to 140 °F (60 °C)
- Design for retrofitable PT100 sensor
- Non contaminating FES 93 filled design
Options
- Other voltages
- Y∆ - start (pos. of cables 90°)
- Motors in complete 316 SS and 904 L
- PT 100 temperature sensor (sold separately)
- Lead in different lengths up to 165 ft. (50 m)
Technical Specifications
- 10" Three-Phase Motors, 2-Pole, 3600 RPM
- 130-185 kW / 175-250 hp
- 10" flange
- IP 68 protection
- 10 maximum starts per hour
- Vertical and horizontal installation (excluding 185 kW / 250 hp motors)
- Motor Lead in 20 ft. (6 m) length
- 380-415 V/50 Hz, 460 V/60 Hz, and 575 V/60 Hz standard voltages
- Voltage tolerance (50 Hz): -10% / +6% UN [380-415V = (380-10%) – (415+6%)]
- Voltage tolerance (60 Hz): ±10% UN
- PE2/PA winding insulation for max. ambient temp. of 113 °F (45 °C) at the same cooling conditions as standard
-
10-Inch Three-Phase Models (2P - 3600 RPM)
PN (kW/HP) UN / f Model No. Digit 1 – 6 Model No. Digit 7 – 10 V Hz DOL Y∆ PE2/PA21 304 316 SS 904 L 130/175 460/380 60/50 264 134 264 234 5321 6321 7321 575 60 264 564 264 864 150/200 460/380 60/50 264 135 264 235 575 60 264 565 264 865 185/250 460/380 60/50 264 136 264 236 575 60 264 566 264 866 380-415 50 264 136 264 236 460/380 60/50 264 136 264 236 380 60 - 264 766 -
Motor Leads
DOL PN (kW/HP) Ø (mm²) B / H (mm/in) L (m/ft) Qyt. Lead Lead Seal Kit Lead SealKit Mod.- Nr. 304/316 Mod.- Nr. 904 L Mod.- Nr. 130/175 4G35 B 48.5/1.91 6/20 1 308 710 117 308 660 721 308 660 725 H 16.5/.65 110-150/150-200 (PE2/PA) 3X50 B 46.5/1.83 6/20 1 308 710 113 308 660 712 308 660 726 H 19.5/0.77 185/250** 1X70 D 20.7/0.82 6/20 3 308 711 000 308 660 732 308 660 733 - For PE2/PA engines additionally the special Tape 700 541 688 is absolutely necessary
Y∆ PN (kW/HP) Ø (mm²) B / H (mm/in) Lengths (m/ft) Qyt. Lead Mod.- Nr. Lead seal Kit 304/316 Mod.- Nr. Lead seal Kit 904 L Mod.- Nr. 10-150/150-200 3X25 B 37.5/1.48 6/20 1 308 710 114 308 660 713 308 660 728 H 6/0.63 4G25 B 44.3/1.74 1 H 14.5/0.57 185 /250 4G35 B 48.5/1.91 6/20 1 308 710 121 308 660 723 308 660 729 H 6.5/0.65 3X35 B 38.5/1.52 1 H 16.5/0.65 - For PE2/PA engines additionally the special Tape 700 541 688 is absolutely necessary
Technical Data
Stator and Rotor (50/60 Hz) PN (kW/HP) Stator (incl. winding and 6 m motor lead) Rotor UN / f 304/316 904 L 304/316 904 L V Hz DOL PE2/PA DOL PE2/PA Y∆ PE2/PA Y∆ PE2/PA 130/175 460/380 60/50 326314931 326314921 326314981 326314971 176 379 803K 575 60 326317931 326317921 326317981 326317971 150/200 460/380 60/50 326325931 326325921 326325981 326325971 176 379 804K 575 60 326327931 326327921 326327981 326327971 185/250 460/380 60/50 326448931 326448921 326448981 326448971 176 379 805K 575 60 327534931 327534921 327534981 327534971 PE2/PA Insulation Standard Windings (575 V / 60 Hz) PN Model No. Turns Per Coil Wire Dia. Isolation Type Group Conn. Total Wire L (m) Resist. Coil (Ω) Resist. Y∆ Resist. DOL (kW/HP) Winding Kits (mm) (U1-U2) (Ω) (U1-V1) (Ω) 130/175 326317999 9+10+9+10 1.8/2.8 DR.II PE2/PA Parallel 1067 0.2987 0.1494 0.0996 150/200 326327999 8+8+8+8 2.7/4.1 495 0.2454 0.1227 0.0818 185/250 327534999 6+7+6+7 2.1/3.3 2DR.II 904 0.1834 0.0917 0.0611 PE2/PA Insulation Standard Windings (380-415 V/50 Hz / 460 V/60 Hz) PN Model No. Turns Per Coil Wire Dia. Isolation Type Group Conn. Total Wire L (m) Resist. Coil (Ω) Resist. Y∆ Resist. DOL (kW/HP) Winding Kits (mm) (U1-U2) (Ω) (U1-V1) (Ω) 130/175 326314999 7+8+7+8 2.0/3.1 2DR.II PE2/PA Parallel 850 0.191 0.0955 0.0636 150/200 326325999 6+7+6+7 2.1/3.3 2DR.II 810 0.1647 0.0823 0.0549 185/250 326448999 5+5+6+5 2.3/3.5 2DR.II 735 0.124 0.062 0.0413 Insulation Resistant (20 °C / 500 VDC) New Motor w/o Drop Cable 400 > MΩ Used Motor w/o Drop Cable 20 > New Motor w/ Drop Cable 4 > Used Motor w/ Drop Cable 1 -
Catalogs
Spec Sheets