V-SP Series Vertical Split Case

V-SP Series Vertical Split Case

The V-SP splitcase pumps are used in a variety of commercial, industrial & municipal applications whilst featuring vertical mounting to offer an ideal solution where job site space is limited. V-SP models allow the standard SP splitcase pump to be mounted vertically drastically limiting the floor space needed as compared to the standard SP product line.

This heavy wall, Francis design, enclosed, bronze impeller provides a very broad operating range. The casing features an exclusive Thru-Bore line boring machining operation that greatly simplifies manufacturing and maintenance. Bearing & bearing housings can be inspected and/or replaced without removing the top part of the casing. The rotor assembly also features completely removable and replaceable packing housings/seal chambers with a replaceable vortex suppressor. Each model features 250# cast dimensional flanges and 420 stainless steel shafting.

FE Select Black Logo

FE Select - Configure & Quote

U.S.A. Canada
Features
Resources
  • Performance Specifications:

    • Flows To: 30,000+ GPM (6,813 m³/hr)
    • Heads To: 550 Feet (168 m)
    • Temperatures To: 300ºF (149ºC)
    • Speed Ranges: 500 RPM To 3600 RPM
    • Size Range: 2×3-10 (50/26) – 32×40-40 (800/100)

    Features:

    • Cast iron casing/bronze impeller
    • Vertical orientation saves floor space
    • Exclusive Thru-Bore casing that allows packing housings/seal chambers to be removed with the rotor assembly
    • Top bearing housing & bearings can be inspected and/or replaced without removing casing top
    • Top roller bearing is of the deep groove, double roller bearing
    • Grease lubricated bearing
    • Oil lip sealed bearing with optional bearing isolators
    • Fully removable rotor assembly
    • Packing housing/seal chamber are removable with rotor assembly
    • Packing standard with optional FPS-Pumps exclusive Carbon/Silicone-Carbide/Viton mechanical seal or optional single or double cartridge mechanical seal
    • Multi-vane, enclosed, high efficiency impeller with broad band operating range
    • Bronze, API style, stepped case wear rings
    • 125# suction/125# discharge flange with 250# cast dimensions standard
    • Suction & discharge gauge connections standard
    • Turned, ground and polished 420 stainless steel shaft standard
    • Heavy duty, 304 stainless steel shaft sleeves with exclusive external o-ring groove
    • Proprietery outboard, heavy duty, fluted bushing that cannot be contaminated by the pumped fluid
    • 50,000+ hour minimum L10 bearing life standard

    Available Metallurgies:

    Cast iron, ductile iron, all bronze, all 304 stainless steel, all 316 stainless steel