-
- Vertical 1-1/4" FNPT discharge
- Powerful 2 hp, 3450 rpm motor to handle the demands of grinding domestic sewage
- Mechanical float switch for automatic operation on 515863, 515861, and 515873
- Start/Run components encased in oil-free chamber requiring no control panel
- Carbon/Ceramic mechanical seals
- Deflection-resistant, short motor shaft
- Corrosion-resistant brass impeller minimizes downtime and maintenance
- Seven-vane, angled face, non-clogging, balanced impeller
- Tight cutting clearances for superior grinding at 414,000 cuts per minute
- Epoxy-coated finish for corrosion resistance and durability
- Built-in overload protection prevents over-current/temperature damage
- GLK-SST Grinder Leg Kit included on 515861
-
Item No. Model HP Volts Hz Full Load Amps/ Watts Cord Performance (GPM @ Head) Shut-Off PSI Weight (lbs) 20' 40' 60' 80' 100' 120' 515861 IGP-A231-20 2 208-230 60 13.9/3200 20' 32 31 30 25 20 10 130’ 56 104 515862 *IGP-A231-20 2 208-230 60 13.9/3200 20' 32 31 30 25 20 10 130’ 56 104 515863 IGP-A231-20 2 208-230 60 13.9/3200 20' 32 31 30 25 20 10 130’ 56 104 515873 IGP-A231-30 2 208-230 60 13.9/3200 30' 32 31 30 25 20 10 130’ 56 104 515874 *IGP-A231-30 2 208-230 60 13.9/3200 30' 32 31 30 25 20 10 130’ 56 104 - *Float not included
-
Construction
Motor Cover Cast iron with epoxy-coating Motor Cover O-ring Nitrile Motor Design Single-phase, capacitor start, capacitor run Insulation Class F Overload Protection Internal, on winding thermal protector Motor Shaft AISI 300 series stainless steel Ball Bearing-Upper Single row ball, 6203 Ball Bearing-Lower Single row ball, 6306 Seal Housing Cast iron with epoxy-coating Mechanical Seal Carbon/ceramic Volute Cast iron with epoxy-coating Impeller Brass Rotating Cutter 2 blade design, AISI 440C stainless steel, through hardened to Rockwell 55-60C Stationary Cutter AISI 440C stainless steel, hardened to Rockwell 55-60C External Hardware 300 series stainless steel Power Cable Type SOW/or SOW 14/3 AWG