-
- Vertical 1-1/4" FNPT discharge
- Powerful 2 hp, 3450 rpm motor to handle the demands of grinding domestic sewage
- Externally-mounted start components*
- Carbon/Ceramic mechanical seal
- Deflection-resistant, short motor shaft
- Corrosion-resistant brass impeller minimizes downtime and maintenance
- Seven-vane, angled face, non-clogging, balanced impeller
- Tight cutting clearances for superior grinding at 414,000 cuts per minute
- Epoxy-coated finish for corrosion resistance and durability
- Built-in overload protection prevents over-current and over temperature damage
- *The IGP Manual Series requires a specific control panel or capacitor kit from FPS, matched to the pump for proper operation and third-party approval.
-
Item No. Model HP Volts Hz Phase Full Load Amps/ Watts Performance (GPM @ Head) Shut-Off PSI Weight (lbs) 20' 40' 60' 80' 100' 120' 515864 IGP-M231-15 2 208-230 60 1 13.9/3200 32 31 30 25 20 10 130' 56 75 515879 IGP-M231-30 2 208-230 60 1 13.9/3200 32 31 30 25 20 10 130' 56 75 515870 IGP-M233-30 2 208-230 60 3 10/1300 32 31 30 25 20 10 130' 56 75 515871 IGP-M463-30 2 460 60 3 4.5/1025 32 31 30 25 20 10 130' 56 75 515872 IGP-M573-30 2 575 60 3 3/850 32 31 30 25 20 10 130' 56 75 -
Construction
Motor Cover Cast iron with epoxy coating Motor Cover O-ring Nitrile Motor Design Single-phase, capacitor start, capacitor run or three-phase Insulation Class F Overload Protection Internal, on winding thermal protector Motor Shaft *AISI 300 series stainless steel Ball Bearing-Upper Single row ball, 6203 Ball Bearing-Lower Single row ball, 6306 Seal Housing Cast iron with epoxy coating Mechanical Seal Carbon/Ceramic Volute Cast iron with epoxy coating Impeller Brass Rotating Cutter 2 blade design, AISI 440C stainless steel, through-hardened to Rockwell 55-60C Stationary Cutter AISI 440C stainless steel, hardened to Rockwell 55-60C External Hardware 300 series stainless steel Power Cable Type SOW-A or SOW 14/4 AWG *In contact with fluid pumped -
Spec Sheets
Manuals
Videos