Applications

• Used for a multitude of purposes in commercial and industrial applications such as: sewage, effluent, irrigation, and general dewatering.

Features & Benefits

• Simplified On-Site Maintenance: Field adjustable wear plate provides clearance between the impeller and volute for simplified maintenance, minimizing operational downtime while maximizing profit without the need and additional cost of a replaceable wear ring
• Up To 6 Times Longer Seal Life: Factory standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance than carbon versus ceramic commonly used for both seals
• Factory standard exclusion seal provides a first line of defense. If the exclusion seal and first mechanical seal is breached, the Seal Fail probe will send a signal to the control panel providing an alert for service.
• Premium Heat & Chemical Resistance: Motor enclosure sealing system utilizes Fluroelastomer (FKM) O-Rings to offer added chemical and temperature resistance
• Corrosion Resistance Comes Standard: All castings are powder coated, while ductile iron casted impellers provide added corrosion resistance and are less brittle when handling rigid debris versus competitive cast iron versions
• Fully Supported: Comes fully supported by an industry-leading team of Technical Support and Service professionals
• All 1-Phase Non-Clog Pumps require a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

Specifications

• 4" horizontal flange discharge (125# ANSI flange)
• Maximum solids size: 3"
• Power cable - 8/4 -type SOOW– 30' & 50'
• Sensor cable – 16/4 – type SOOW – 30’ & 50'
• Class F motor insulation
• Continuous duty motor (104 °F maximum)
• Lower double row ball bearing
• 300 series SST motor shaft
• Seal-fail indication probe
• 300 series SST fasteners
• Cast iron motor housing, volute, and seal chamber
• Fluoroelastomer (FKM) sealing system for motor enclosure
• Mechanical seals: Dual silicon carbide
• Additional exclusion seal
• Agency listing: cCSAus
• *The 1-Phase Non-Clog Pump requires a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.