3NCX Series

3NCX Series

The FPS NCX Series Explosion Proof Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly municipal wastewater transfer solution with flows up to 625 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NCX Series sets the bar for serviceability and reliability.

FE Select Black Logo

FE Select - Configure & Quote

USA Canada
Features
Order Info
Specifications
Resources
  • Applications

    • Used in a variety of applications such as lift stations; sewage systems; stormwater, flood and pollution control; industrial waste and dewatering; wastewater treatment plants; and general fluid transfer
    • Also used in municipal, commercial, and industrial markets for applications that require explosion-proof rating

    Features & Benefits

    • Simplified On-Site Maintenance: Field adjustable wear plate provides adjustable clearance between the impeller and volute for simplified maintenance, minimizing operational downtime without the need and additional cost of a replaceable wear ring
    • Up To 6 Times Longer Seal Life: Factory standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance than carbon versus ceramic commonly used for both seals, resulting in superior performance and longevity
    • Premium Heat & Chemical Resistance: Motor enclosure sealing system utilizes Viton® O-rings to offer added chemical and temperature resistance
    • Corrosion Resistance Comes Standard: Ductile iron casted impellers provide added corrosion resistance and are more robust when handling rigid debris versus competitive cast iron versions
    • Fully Supported: Comes fully supported by an industry-leading team of technical support and service professionals
    • All single-phase Non-Clog Pumps require a specific starter kit from FPS, matched to the pump for proper operation and third-party approval

    Specifications

    • 3" horizontal flange discharge (125# ANSI flange)
    • Maximum solids size: 2.5"
    • Power cable – 10GA/8GA – 316 SST Receptacle, 304 SST Coupling
    • Control cable – 18GA – 316 SST Receptacle, 304 SST Coupling
    • Class H motor insulation
    • Continuous duty motor (104 °F maximum)
    • AISI 416 SST motor shaft
    • Dual moisture sensing probes
    • 300 series SST fasteners
    • Cast iron motor housing, volute, and seal chamber
    • Viton® sealing system for motor enclosure
    • Mechanical seals: Dual silicon carbide
    • Agency listing: cCSAus, Certified for Class 1 Division 1 Groups C & D
    • *The 1-Phase Non-Clog Pump requires a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.
  • Single-Phase*

    ItemModelHPVoltsAmpsHzImpeller Dia.Cord Length (ft)
    87110435-013NCX-323P1323017.5606.30" (160 mm)50
    87110436-013NCX-523P15307.48" (190 mm)
    • *Requires item 305625101 or 305625102 NCX Series Starter Kit or Non-Clog Control Panel

    Three-Phase

    ItemModelHPVoltsAmpsHzImpeller Dia.Cord Length (ft)
    87110437-013NCX-320P332089.3606.30"
    (160 mm)
    50
    87110438-013NCX-323P32308.4
    87110439-013NCX-346P34604.4
    87110440-013NCX-357P35753.52
    87110441-013NCX-520P3520815.47.48"
    (190 mm)
    87110442-013NCX-523P323014
    87110443-013NCX-546P34607
    87110444-013NCX-557P35755.6
  • HP, PhaseABCDEFHJI
    3/5 HP, 3-PH30.6"
    777.1 mm
    6.2"
    156.5 mm
    15.6"
    396.4 mm
    9.5"
    242 mm
    2.6"
    65 mm
    8.6"
    218.6 mm
    6"
    153 mm
    12.1"
    307.4 mm
    0.8"
    20 mm
    5 HP, 1-PH36.7''
    932.2 mm
    15.7"
    399.2 mm
    9.2"
    234.3 mm
    13.5"
    342.1 mm